Installation skills of copper floor drain in toilet

Many small details are often ignored in decoration, but what makes our life convenient is the design of these details. In the communication with the designer, we seldom talk about the location of the copper floor drain in detail, but after we settled in, we can immediately feel the great inconvenience of life caused by the neglect at the beginning.

1. The copper floor drain is set at the narrow place

In the small area toilet, the sanitary equipment is installed compactly. For example, the toilet is close to the bathtub, and the floor drain is designed between the toilet and the bathtub. So every time you clean the floor drain, you must stretch your hand and squeeze into the seam. It's very painful.

2. Too close to toilet door

Keep the low point of the bathroom away from the wooden floor of the bedroom, but it can't be easily stepped on, because barefoot doesn't feel comfortable on the floor drain.

3. Designed in the middle of the tile

If the floor drain is designed in the middle of the ceramic tile, it is difficult for water to flow to the floor drain, resulting in ponding.

4. Designed at the edge of the shower door

Usually, the floor drain is located at the lower part of the toilet. The water is not easy to dry. Over time, the glass glue at the edge is easy to mildew. Our common floor drains are placed at the corner of the toilet due to the design needs of the discharge slope. However, this is a more traditional practice. If you copy mechanically, there will be a floor drain in the crevice for "survival". In fact, the location of the floor drain is much more free than we think.

5. Designed at four corners of ceramic tile

In this way, it is not easy to supply water, and the master can better control the angle and let the ground leak low.

6. Stay away from the door and be wide around

There is no loss of floor drain caused by opening and closing the door, and there is no need to worry about extreme pulling of the arm during cleaning, resulting in inconvenience.

7. Under the bath cabinet and hand washing table

It is relatively hidden, and the surroundings of these two places are relatively wide. If the toilet is also wider on both sides, it is also a good choice.

8. Long copper floor drain is good for water discharge

If the budget is enough, it can be used as a growth floor drain. First, the area is large and the drainage is good. Second, the slope of the drainage slope is easy to do accurately. Third, it has a good appearance and texture. The disadvantage is that the long floor drain is more expensive and easy to accumulate dirty things. You need to open the floor drain every time. Compared with the common square floor drain, it must take more trouble in cleaning.

9. Combined with discharge area

This is an improved practice of the hotel. Families can refer to whether it is appropriate. That is, make a low strip block at the floor drain, and the drainage slope in the shower room will be easier to do. In the long block, two long bricks are used to slant the floor drain, which has the advantage of long floor drain and does not need to increase the budget.